From Rotting Timber to Wood-Effect Aluminium: A Complete Entrance Replacement in Nottinghamshire
A 6m automated sliding gate, matching fencing and smart video access, with the look of timber and none of the rot.
​
The problem
The sliding gate automation at this Nottinghamshire home had failed, and the timber gate and fencing around it had started to rot. Rather than patch it up, the customer wanted the whole entrance replaced: the sliding gate, the fencing, the letterbox infill panel, two wall panels and the side gate into the garden.
They liked the warmth of wood but didn’t want to be back in the same position in a few years.
​
What we installed
We stripped out the old gate, automation, fencing, posts and panels, then removed the old ground track completely so the new track and guide post could go in on properly prepared ground.
In their place, completed in September:
-
A 6m-wide × 1.8m-high aluminium sliding gate
-
9.5m of matching aluminium fencing
-
An infill panel with a built-in parcel box
-
Two matching wall panels
-
A matching pedestrian side gate into the garden
Every piece uses the same black aluminium frame with a dark wood-effect infill, so the entrance reads as one design from end to end. It keeps the character of timber, but it won’t rot, warp or need staining.
​
Automation that blends in
The gate runs on a Fadini JXP sliding gate operator with safety edges. We mounted the safety edges in black aluminium sections so they sit neatly against the framework instead of standing out.
The gate also has a pedestrian setting, opening partway when nobody needs to drive through.
​
Several ways in, one way out
A DNAKE touchscreen video intercom lets the customer see and speak to visitors, and gives a choice of ways to open the gate:
-
Touchscreen keypad
-
Facial recognition
-
QR code
-
Bluetooth
-
Siri
On the inside, a black exit button opens the gate partway for anyone leaving on foot. It runs through a timer, so it only works during the hours the customer has chosen.
​
One remote for the gate and the garage
We fitted a standalone receiver to the existing garage door operator so a single remote now handles both:
-
Button 1: entrance gate
-
Button 2: garage door
-
Button 3: gate and garage door together
One press on the way home and both are open by the time the car reaches the drive.
​
The result
A failed gate and rotting timber have been replaced by a matching aluminium entrance that should look the same in ten years as it does today. The details were chosen to disappear into the design: black safety-edge sections, a black exit button, and a parcel box built into the panel.
Like all our installations, it is fully compliant and was handed over with a complete technical folder, and it includes a free service six months after installation.
​
Planning your own entrance?
Whether you’re replacing a tired gate or starting from scratch, you’ll deal directly with the two of us, from the first visit to the final handover.
![]() | ![]() | ![]() |
|---|---|---|
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() |









































